ICC CHAMPIONS TROPHY 2013 Live Streaming!

Cell Phone Tricks: All China Mobiles Secret Codes

All China Mobile Phones Secret Codes

*#66*# Set Factory Mode CONFIRMED
*#8375# Show Software Version CONFIRMED
*#1234# A2DP ACP Mode CONFIRMED
*#1234# A2DP INT Mode CONFIRMED
*#0000# + Send : Set Default Language CONFIRMED
*#0007# + Send : Set Language to Russian CONFIRMED
*#0033# + Send : Set Language to French CONFIRMED
*#0034# + Send : Set Language to Spanish CONFIRMED
*#0039# + Send : Set Language to Italian CONFIRMED
*#0044# + Send : Set Language to English CONFIRMED
*#0049# + Send : Set Language to German CONFIRMED
*#0066# + Send : Set Language to Thai CONFIRMED
*#0084# + Send : Set Language to Vietnamese CONFIRMED
*#0966# + Send : Set Language to Arabic CONFIRMED
*#800# make Etel E10 model displaying message BT power on. But on display it dont resemble the Bluetooth power on icon.(actually t makes BT stuck, but after restarting t becomes normal <tested by me>)

More codes to reset China mobile phone
*#77218114#
*#881188#
*#94267357#
*#9426*357#
*#19912006#
*#118811#
*#3646633#

also found these

Service codes Konka:
C926 software version: *320# Send
C926 set default language: *#0000# Send
C926 set English language: *#0044# Send

Service codes GStar:
GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set language to English: *#0044#
Set language to Russian: *#0007#

ZTE Mobile:

1- *938*737381#
2- PHONE WILL DIPLAYED DONE
3- POWER OFF YOUR PHONE AND POWER ON AGAIN
alcatel:>E205
unlocking phone code,only press***847# without simcard
E900 software version: *#5002*8376263#
E900 full reset: *2767*3855#

Service codes Spice: 
S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200
S410 engineer mode: *#3646633#
S900 software version: *#8375#
S900 serial no: *#33778#

Service codes Philips: 
S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200

Service codes “Chinese” models:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#

Service codes BenQ: 
software version: *#300#
test mode: *#302*20040615#

Service codes Pantech: 
software version: *01763*79837#
service menu: *01763*476#
reset defaults (phone/user code reset to default): *01763*737381#

Service codes VK-Mobile **x, 5xx: 
software version: *#79#
software version: *#837#
service menu: *#85*364# (hold #)

Service codes VK200, VK2000, VK2010, VK2020, VK4000: 
software version: *#79#
service menu: *#9998*8336# (hold #)
reset defaults (phone/user code reset to default): *#9998*7328# (hold #)

Service codes LG: 
software version: 2945#*#
KG300 NVRAM format: 2945#*# -> menu 15

Service codes Sony-Ericsson: 
J100 software version: #82#

Service codes Fly: 
M100 software version: ####0000#
2040(i) reset defaults: *#987*99# Send
MX200 reset defaults: *#987*99# Send
MX200 software version: *#900# Send
SL300m reset defaults: *#987*99# Send
SL300m software version: *#900# Send
SL500m reset defaults: *#987*99# Send
SL500m software version: *#900# Send
MP500 reset defaults: *#987*99# Send
MP500 software version: *#900# Send
Set language to English: *#0044#
Set language to Russian: *#0007#

Service codes Konka: 
C926 software version: *320# Send
C926 set default language: *#0000# Send
C926 set English language: *#0044# Send

Service codes GStar: 
GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set language to English: *#0044#
Set language to Russian: *#0007#

Service codes Motofone-F3: 
Motofone F3 software version: **9999* Send
***300* Set SIM Pin
***310* / ***311* SIM Pin ON | OFF
***000* Reset Factory settings
***644* Set Voicemail number
***260* / ***261* Auto keypad lock ON | OFF
***510* / ***511* Voice Prompts ON | OFF
***160* / ***161* Restricted Calling (Phonebook only) ON | OFF
***200608* Send: software version
***200606* Send: software version
***200806* Send: flex version
***250* / ***251* Keypad tones ON | OFF
***470* Select time format
***500* /***501* Prepaid Balance Display ON | OFF
***520* Change language

Service codes Motorola: 
C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
C138, C139, C140 software version: #02#*
C155, C156, C157 software version: #02#*
C257, C261 software version: #02#*
V171, V172, V173 software version: #02#*
V175, V176, V176 software version: #02#*
C168, W220 software version: *#**837#
W208, W375 software version: #02#*
and “yes””

I-mobile Inno30, 55, 89, 90, 99, 100, A10, A20, P10, Vk200
- Set full factory *741*737381#
- Set full factory *741*7373868#
- Set full factory *741*2878#
- Set Engineer Mode *888*888#
- Check software version *888*837#

I-mobile 100 ,200 , 313
- Check software version #*888#

I-mobile 309, 310
- Check software version *0*4636#
- Test Mode *0*6268#

I-mobile 311
- Check software version #*878#

I-mobile 511
- Check software version *1222*1#

I-mobile 301, 302,308, 508, 601, 602, 603, 604, 606, 611, 901, 902
- Check software version *#159#
- Set Factory Mode *#32787#
- Set Engineer Mode *#3646633#

I-mobile 503, 506, 605, 600, 607, 608
- Set Engineer Mode ***503#
- Set Factory Mode ***504#
- Set Auto Test ***505#

I-mobile 509, 612
- Set Factory Mode *#66*#

I-mobile 504, 505, 803
- Check software version *68*48#
- Set full factory *789#
- Test Mode *#789#

I-mobile 305, 306, 315, 510, 609, 609i,516
- Check software version *#8375#
- Set Factory Mode 878

I-mobile 610
- Check software version *#22#

I-mobile J101, J102
- Test Mode *23638777*783781#

I-mobile 502, 502i, 505, k9, 802 
- Check software version *201206*4636#

Cell Phone Tricks: UFONE GSM Secret Codes

Assalam U Alaikum!

In this post I've collected some UFONE GSM codes which most of the prople don't know. I hope that they will help you a lot. How much you like this stuff? Tell me through comments.

GPRS Settings
Profile Name: Ufone
Home URL: http://wap.ufone.com/
Bearer: GPRS Only
Proxy: Disable/No
DNS1: 0.0.0.0
DNS2: 0.0.0.0
Access Point Name /
APN: ufone.pfinternet / ufone.plinternet / ufone.internet
Login ID/Username: ufone
Password: ufone

MMS Settings

Connection Settings

Setup a new connection:

Name is: “UfoneMMS”

Connection Name: Ufone.mms

AccessPoint: ufone.plmms

Everything else: default

Alternatively you can get settings either by calling Ufone Help Line.

Shortcuts:
##004# Deactivate Voice Mail **004*190# Activate Voice Mail
*43# Activate Call Waiting #43# Deactivate Call Waiting
*124# Free Balance Check
*123*(PIN)# Balance Recharge
*444*1# Ufone Prepay 2 Ufone Public Demand Conversion
*444*2# Ufone Public Demand 2 Ufone Prepay Conversion
*#21# Allows you to check the number that “All Calls” are diverted to.
*#30# Lets you see the private number.
*#61# Allows you to check the number that “On No Reply” calls are diverted to.
*#62# Allows you to check the number that “Divert If Unreachable (no service)” calls are diverted to.
*#67# Allows you to check the number that “On Busy Calls” are diverted to.

CLIR: Presentation of one’s own number to the to the called party
Activate CLIR **31#
Activate CLIR for the actual call *31#number
Deactivate CLIR ##31#
Deactivate CLIR for the actual call #31#number
Check status of CLIR *#31#
De-register all call diversions ##002#
Activate unconditionally divert all calls *21#
De-register unconditionally divert all calls ##21#
Deactivate unconditionally divert all calls #21#
Check status of unconditionally divert all calls *#21#
Divert on no answer to number and activate **61*number#
Activate divert on no answer *61#
Activate divert on busy *67# De-register divert on busy ##67#
Deactivate divert on busy #67# Check status of divert on busy *#67#
Check status of barr all outgoing calls *#33# Activate barr all calls **330*code#
Deactivate barr all calls #330*code#
Check status of barr all calls *#330*code#
Activate barr all outgoing calls **333*code#
Deactivate barr all outgoing calls #333*code#
Check status of barr all outgoing calls *#333#
Activate barr all incoming calls **35*code#
Deactivate barr all incoming calls #35*code#
Check status of barr all incoming calls *#35#
Activate barr all incoming calls when roaming **351*code#
Deactivate barr all incoming calls when roaming #351*code#
Check status of barr all incoming calls when roaming *#351#
Activate barr all incoming calls **353*code#
Deactivate barr all incoming calls #353*code#
Check status of barr all incoming calls *#353#

Cell Phone Tricks: NOKIA Mobiles Secret Codes

Assalam U Alaikum! Today i am here with some Mobile Tips and Trick, where I'll guide you about  “Nokia Mobile Tips and Tricks”.

To check the IMEI (International Mobile Equipment Identity)

Type     *#06#

Information you get from the IMEI-

XXXXXX XX XXXXXX X

TAC FAC SNR SP

TAC = Type approval code
FAC = Final assembly code
SNR = Serial number
SP = Spare

To check the phones Software revision

Type        *#0000#

Information you get from the Software revision.

V 05.31

18-02-99

NSE-3

1ST Line:              Software revision
2ND Line:            The date of the software release
3RD Line:             Phone type

*#9999# Phones software version if *#0000# does not work.

check the number that “All Calls” are diverted to

Type *#21#

To Display security code that is in use.

Type *#2640#

To see the private numbers

Type *#30#

To check the “Call Waiting” status of your phone.

Type *#43#

To check the number that “On No Reply” calls are diverted to.

Type *#61#

To check the number that “Divert If Unreachable (no service)” calls
are diverted to.

Type *#62#

To check the number that “On Busy Calls” are diverted to.

Type *#67#

Removes operator logo on Nokia 3310 & 3330 mobile

Type *#67705646#

To Check Manufactures code.

Type *#7760#

To Restore factory settings

Type *#7780#

Note: 12345 This is the default security code for Nokia Mobiles.

Email Hacking: How to send Emails from multiple ID's using one Gmail account?

In this post, I am going to show you how to use your Gmail account to send and receive emails from multiple addresses. Most of us own more than one email account say for example, one from Gmail, one from Yahoo and one from Hotmail. If you are tired of logging into multiple accounts to check your inbox or send emails, I have a solution here.

Gmail has an option to integrate multiple email accounts (email addresses) into a single Gmail account. Once you integrate multiple email addresses into your Gmail account, you can use the same account to send and receive emails for different email addresses you have. Let’s take a simple example.

Suppose you have three email addresses (email accounts):

1. xxxxx@gmail.com
2. xxxxx@yahoo.com
3. xxxxx@hotmail.com

You can integrate the emails john@yahoo.com and john@hotmail.com to xxxxx@gmail.com and operate all the three accounts from your single gmail account. Here is a step-by-step procedure to do this:

1. Login to your gmail account.
2. Click on Settings at the top right corner.
3. Under Settings, click on the  Accounts tab.
4. Now you’ll see the first option “Send mail as:“
5. Under this option, click on Add another email address you own.
6. Now a small new window will pop-up asking you to enter the details of your new email address.
7. Here you can enter any name and any email address. The email address need not belong to gmail only. You can enter your yahoo, hotmail or any other valid email address.
8. A Verification email will be sent to the address that you specify. Once you verify that you own the email address, it will be integrated to your Gmail account.

Now, when you compose a new email, you’ll see an option to select from multiple address to send the mail. Also you’ll receive the incoming mails for multiple addresses to a single mailbox. I hope this will benefit you.

Before you leave, I should also tell you one good advantage of this. According to Gmail privacy policy, they will not send the user’s IP address in the outgoing emails. That means, when you send an email from your Gmail account , the receiver will not be able to find out your IP address. But you do not have this advantage in Yahoo or other email providers.

Please share your opinions through comments. I hope this helps….

Article Courtesy: www.gohacking.com